|
Real Spacecraft Paper Models for Download
|
|
View
|
Description
|
Difficulty rating
|
|
Mini Saturn V. Scale 1/500. about 7" tall.
|
4/10
|
|
Small shuttle 1/300 scale
|
3/10
|
|
Roberto Falorni < r.falorni@tiscali.it >
has submitted this wonderful 1/200 shuttle stack. It goes perfectly with
the shuttle from Delta7Studios. Thanks for sharing Roberto!
1:200 shuttle available here
|
3/10
|
|
Museum-quality Saturn V, over 4' tall. 1/96 scale
Saturn V rocket version 2.1 !!! - A vastly improved version! Thanks to
Ton Noteboom for this contribution! 2.1 - Now with Apollo 11 markings!
|
6/10
|
|
VentureStar X-33 RLV. Thanks to Donald E Edgecomb for his work on this great model.
instructions and
orginal version here. (thanks to Jake for pointing it out that they were
missing.)
And now a third revision, with even better graphics!! Thanks John D. for the next leapfrog.
|
3/10
|
|
1/100 scale Shuttle stack.
The external tank and Solid rocket boosters.
The shuttle to match is here. These are really hard!!!!
|
9/10
|
|
|
|
1/100 scale Shuttle stack 2.0!!!. Totally re-designed by Bill,
a much more fitting match for the shuttle.
|
5/10
|
|
|
|
X-20.
the X-20 Dyna-Soar. Experimental prototype. Thanks to
Lars Folmann for his superior design and generosity in making
this model available. Plus a lot more.
|
7/10
|
|
|
|
Ton has also graciously designed for your collection a 1/48 apollo capsule.
|
4/10
|
|
Ton's enhanced rendition of the Apollo CM and SM in 1:48 scale.
Model here
|
4/10
|
|
|
|
Now Available...
A repaint and resizing of Tons original Service Module to 1/48 scale.
Are you seeing what's going on here?
|
4/10
|
|
Now Available...
My all time FAVORITE paper model, a resized, hi-resolution reproduction
for the paper modeller of the GULF OIL LEM, scale 1/48.
|
8/10
|
|
|
|
Gulf LEM 1.1 !!!!!
My all time FAVORITE paper model now re-edited to a proper paper model,
with all the 21st century buzzers and bells. Thank you so much
Guy Lordong for making this available. Scale 1/44
|
6/10
|
|
1/96 model of the Lockheed L1011 configured as the Stargazer Launch Vehicle
and the Pegasus Satellite Launcher. (Click here)
And now a 1/48 version again by Ton. (And Click here!!!)
|
7/10
|
|
1/48 scale Pegasus rocket in Hyper X formation with an X43.
|
4/10
|
|
|
|
1/48 scale 3rd stage of Tons Saturn V...
|
6/10
|
|
|
|
Available now.
1/48 scale 2nd stage of Tons Saturn V. Check out the WIP with this
link, Click on the picture (just to the left of this text) for the model.
|
7/10
|
|
|
|
Available now.
1/48 scale 1st stage of Tons Saturn V. Check out the WIP with this
link, Click on the picture (just to the left of this text) for the model.
|
8/10
|
|
Mars rovers, opportunity and spirt 1:20 scale.
With different color configurations depending on Earth/Mars lighting!
Thanks Ton!
This model is based on the original model design by
Erik Te Groen. Erik has a great collection of models
at: http://www.lansbergen.net/
under the section:
Modelbouw
And now for its 1year birthday, an updated weathered
version complete with mars dust. (click here!!!)
|
6/10
|
Thanks Randy for all the Clean Up Work!!!
|
By popular demand my moon mission poster. Print at 75dpi results in
a 19" x 60" poster with the earth being 10" in diameter. Please
note the rest of the poster is not in scale with the Earth. To
put poster to proper scale, the moon should be reduced to 2 3/4" in
diameter, and placed 26' 9" away from the surface of the earth. The
earth orbit and moon orbit trajectories should be around 1/16" away
from the surface of the respective celestial bodies. For further
reference, the orbit of the international space station would be about
3/16" away from the surface of the earth, and a trip to Mars at its
closest would require one to place Mars roughly 2 miles away. Now
thats in proper perspective. - Jon
|
|
|
|
Saturn V blueprint poster.
|
|
Tons realization of a Gemini-TitanII. Comes out great. 1/96 scale.
(click here)
NOW IN 1/48 scale!!! (click here!!!)
Instructions here
NOW with better graphics!! (click here!!!)
|
6/10
|
|
The avro arrow as designed by Bill. Thanks bill!!
Bills website is here:
http://aa.domaindlx.com/
ModelPaperEngine/AVRO%20ARROW.html
|
???
|
|
Bill K. has a wonderfull version of the Mars rocket
envisioned by Wernher Von Braun, Willy Ley, and Chesley Bonestell in
the 1950's
Model here.
|
4/10
|
|
Ton's version of the Ariane V european rocket.
Model here.
|
4/10
|
|
Nick has designed this 1:200 Delta IV heavy lifter
rocket. Looks great!!!
Model here.
|
4/10
|
|
Nick has now designed this 1:200 Delta IV Medium
rocket. Another great one Nick!!!
Model here.
|
4/10
|
|
A beta version of what we think the SDLV (see the
designers corner for definition) CEV launcher might
look at. This is fresh off the presses, Ton worked at
a fever pace to get it out.
Model here.
And I believe, the final version, of the CEV:
Model here.
And the heavy lifter for the Lunar lander/Fuel:
Model here.
|
4/10
|
|
I've finally gotten back to designing a model.
this is a 1:53 scale model of the new LSAM design.
I hope you like it. Its fun to build, albiet a bit
free-form.
Model here.
|
8/10
|
|
Ton's latest update to the Heavy lifter based on the
change specifications that have just come from nasa.
Model here.
|
4/10
|
|
Roland has sent in his version of the CEV-Launcher complete
with a launch tower. This model looks beautiful, but it is
a beta. Thanks Roland!!! scale 1:288.
Model here.
|
4/10
|
|
Ton's lastest update (2008/05) to the Ares V
rocket.
Model here.
|
4/10
|
|
Ton's semi-official Ares I and Ares V
formallly the SDLVs
Model here.
|
4/10
|
|
Lancer has put his heart and soul into these
two, the Jupiter 120 and Jupiter 232 from Direct in 1:144 scale.
Model here.
|
5/10
|
|
Alfonso is no stranger to paper modeling. He has gladly donated his
1:144 version of the Shuttle Derived Heavy Launcher for your enjoyment.
Alfonso also has an amazing set of Shuttle mission, ISS, and Apollo models at his website:
http://www.axmpaperspacescalemodels.com/
Model here.
|
4/10
|
|
Troy has send in this model of the Black Brant II
Looks great and not too difficult. Thanks Troy.
Model here.
|
3/10
|
|
And now for our first launch tower model.
Arthur has created the launch tower from ESA's Ariane
line of rockets. This tower is build to scale 1/180
to match the Ariane 4 rocket here:
http://pierreg.free.fr/carton/index.htm
http://pierreg.free.fr/carton/projet/arian4/ariane.htm
Model here.
|
4/10
|
|
Ton's wonderfull version of a Titan III rocket,
1/48 scale. 9/23/05 - corrected engines now available.
Model here.
|
5/10
|
|
Ton has also created a model of the DC-X the experimental
VTVL rocket. Nice beginner build.
Model here.
|
3/10
|
|
New to designing models, Mike B has made an incredible
LUT Tower. At 1:480 scale, he has accomplished what many
before him have not. Thanks Mike!!
Model here.
|
3/10
|
|
Mike has teamed up with George to continue (and improve!)
on his 1:480 series. The center is proud to host now the
milkstool version of the LUT with a full colletion of Saturn 1B
rockets, all at 1:480 scale.
Model here.
|
3/10
|
|
A 1:24 Mercury capsule by Ton. Print at 50% (4 pages
to a sheet) to
get a 1:48 model!!
Model here.
|
4/10
|
|
Ton redid this Hubble model, and I added some color to
it. hope its better than the Nasa orginal:
Model here.
|
4/10
|
|
Ton has done an amazing job on one of the long missing
models of the space race, the lunar surveyor. Complete
with a moon surface. 1:24 scale.
Model and moon diorama instructions here.
|
8/10
|
|
New to designing rockets is Ferdinando with
his Sprint anti-balistic missile. 0 to Mach 10 in
5 seconds pulling 100Gs. Not Human rated ;) Wonderful
first model.
Model here.
|
2/10
|
|
Ferdinando has now released his second ICBM, the Hibex.
Model here.
|
2/10
|
|
Towards the end of Soviet Union the space race continued
with the Soviet Union's version of the Shuttle Tansport System.
Here is the Soviet's heavy lifter for that endeavour, the
Energia rocket. Unlike Nasa's STS, the Soviets Heavy lifter
could launch independent of its shuttle. Thanks Leo for sharing
this model. 1:96 scale.
Model here. Now with the buran as well.
And now with the EnergiaM.
And now with the Polyus.
That completes Leo's Energia study. A wonderfull collection.
|
6/10
|
|
John D. has submitted a great beginners model of the X-34.
Enjoy!!!
Model here.
|
3/10
|
|
Leo adds to the Soviet Union's fleet, and updates to the
Buran and Energia. Leo say Happy Holidays to all!!!
Models here.
|
7/10
|
|
In the early days of Apollo. Von Braun and Co. had thought
that two back-to-back launches of rockets that were based on a
cluster of redstone and titan bodies would work. With that in
mind the Engineers at NASA developed the predecessor of the
Saturn V, the Saturn I. Here is the Saturn SA-5.
Thanks Chris for making this available.
Model here
|
6/10
|
|
the first operational part of the new moon effort will be
the orion spacecraft. here is the lastest concept drawing
model from Ton.
Model here
|
3/10
|
|
Ton now has updated the Orion spacecraft incorporating
the latest in updates to the design. Thanks again Ton!!!!
Model here
|
3/10
|
|
a Saturn 1B in 1:96 scale. absolutely beautiful.
model from Ton.
Model here
|
6/10
|
|
Leo offers his proton rocket, with the first part of the
ISS in 1:96 scale.
Model here
|
7/10
|
|
Continuing with our beginners series, here are the Saturn 1B
and the Soviet Soyuz rocket from the middle part of the space
race in the 1960's. Thanks to Roman for making these available.
Model here
|
2/10
|
|
ok, I just love this one as I always like models geared to the beginners.
This is the ARES proposed rocket as envisioned by John J. geared for the
less experienced builder. Enjoy!
Model here
|
3/10
|
|
this is the ares stomp rocket, the directions for the launcher are also included.
Thanks again John J.!!!
Model here
|
3/10, 7/10 launcher
|
|
Test rockets for the manned space programs begin with Little Joe Rockets.
The new moon mission is no different. Thanks Ton...
And also with
the Orion rocket!!!
Model here
|
3/10
|
|
Leo would like to share his Vulcan Rocket from the Russian Space fleet.
Thanks again Leo!!
Model here
|
3/10
|
|
Leo has added the payload to his Vulcan rocket, the LEK, the Russian
moon lander that never actually flew, but nevertheless, was a real
spacecraft.
Model here
|
3/10
|
|
Here's a brilliant design by Gerd of the Chimp Couch from
the Mercury Space Program. Before Astronauts went into space
the Rockets were tested with Monkeys. Here is there spacesuit. Thanks
Gerd for this model and recognizing a little known artifact of the
space program.
Model here
|
6/10
|
|
Lars would like to share his Saturn 1B model of the
ASTP. The apollo soyuz test program signified the beginning
of the end of the cold war. If you ever had a doubt about the
value of the early space program this program should make anyone
realize the bargain the Apollo Program was in $$$ savings to this
country. Thanks Lars for your model.
Model here
|
6/10
|
|
Ton would like to present for all a 1:48 Soyuz rocket. This
design has the added feature that it is specifically designed
to be a flying model capable of handling model rocketry solid
fuel engines. We here are looking forward to pics and vids of
actual launches from our "customers".
This model is colored in pre-launch color schemes as the grey
paint is covered by a layer of condensation that has frozen white...
Model here
|
6/10
|
|
Ton developed this one as a flyer but its also a beautiful
display rocket as well. Here is the Apollo capsule test rocket,
Little Joe II.
Model here
|
4/10
|
|
Ton's rendition of the ATV from ESA. A beautiful model,
to commererate its maiden voyage. Thanks Ton.
Model here
|
4/10
|
|
Ton's now challenges the advanced model maker with
the Voyager probes from the 1970's.
Model here
|
7/10
|
|
John J. has now made his own version of the Voyager
Outer-galactic spacecraft at 1:48. This one is a bit easier than
Ton's version yet still well detailed.
Model here
|
5/10
|
|
Ton's has now released an early design of his, the
Pioneer 10 and 11 spacecraft, in scale 1:24 and 1:48.
Model here
|
5/10
|
|
Ton has been so gracious to submit for your
enjoyment the proposed replacement for the soyuz spacecraft,
ACTS in 1:96 scale.
Model here
|
4/10
|
|
Eric has joined our little cast of players and
is proud to release a lifting body based on the Estes
glider series. I have also included an alternate paint scheme
for the larger version. this is a great beginner model.
Model here
|
3/10
|
|
John J. felt that the Soho spacecraft needed a little
tweaking, and has presented for your enjoyment and education this
great model and writeup of this spacecraft that is currently studying the
Sun.
Model here
|
4/10
|
|
John J. would also like to share his version of the Magellan
space probe (and stack) in 1:48 with the modelling community here at LHVCC-egiftshop.
Thanks again John!!
Model here
|
4/10
|
|
John J. is not sitting idle. Here is his version of the
mars reconnaissance orbiter in 1:48. Thanks John!
Thanks again John!!
Model here
|
5/10
|
|
Newcomer to the center, but not to the Modelling world Christoph
has started a papercraft site of his own, and among the first two
models is the Douglas F5D Skylancer, a prototype delta-wing fighter, flown by Neil Armstrong,
which was used by NASA as a test and Chase Aircraft in many Projects,
including the DynaSoar- , the lifting body- and the supersonic transport program.
Please check out Christoph's website at:
http://www.hoxity.de/papercraft
Model here
|
4/10
|
|
The James Web Space telescope by John J. Another fine addition to our space
collection here at LHVCC.
Model here
|
4/10
|
|
There is no keeping a good man down. John J now has made available a wonderfull model from the early Moon Space race, the Ranger lunar Probe.
Model here
|
4/10
|
|
John J also models more contemporary craft as well. Here
is the Lunar Prospector Probe to the moon from 1998.
Model here
|
4/10
|
|
John J now presents his model version of the Lunar Orbiter in
both 1:48 and 1:24
Model here
|
4/10
|
|
John J's LRO-LCROSS stack in 1:48
Thanks John!
Model here
|
4/10
|
